主要产品：专业生产复合磨床、螺纹磨床、数控端面外圆磨床、数控外圆磨床、数控内圆磨床、深孔内圆磨床、数控无心磨床、普通外圆磨床、内圆磨床、无心磨床；供应磨床配件及专用设备制造与改造！长期服务于工程机械,汽车零件制造,齿轮,航空航天,轴承工具等行业,品质符合并优于**质量标准,精度高,误差小,速度快。
M2110C技术参数
1. 磨孔直径...................................6～100MM
2. 磨孔**深度..................................150mm
2.1**小孔径时....................................9mm
2.2**孔径时..................................150mm
3.工件**旋径
3.1罩内........................................260mm
3.2罩外........................................400mm
3.3极限........................................480mm
4.工件**长度.................................170mm
5.承载工件**重量(含夹具) .............................................50KG
6.工作台**行程...............................550mm
7.床头**回转角度................................20°
8.工件转速
8.1 50HZ电源时.......................180,250,355,500r/min
8.2 60HZ电源时.......................215,300,430,600r/min
9.工作台运动速度.
9.1修整速度.................................0.1～1m/min
9.2磨削速度................................1.5～6 m/min
9.3**速度................................... 8 m/min
10.手轮每转工作台移动量........................5.56mm
11.砂轮进给刻度值
11.1进给手轮每格..............................0.002mm
11.2进给手轮每转...............................0.32mm
11.3调整手轮每格...............................0.01mm
11.4调整手轮每转.................................2mm
12.砂轮**横向移动量............................80mm
13.砂轮**进给次数.............................30r/min
14.砂轮周期进给量........................0.002～0.008mm
15.砂轮转速........................10000,18000,24000r/min
16.油压系统压力
16.1导轨润滑...................................0.1MPa
16.2工作系统.................................0.8～1MPa
17.油泵流量
17.1 50HZ.....................................25L/min
17.2 60HZ.....................................32L/min
18.冷却泵流量..................................25L/min
19.工件电动机功率..........................0.45/0.75KW
20.砂轮电动机功率..............................2.2KW
21.液压电动机功率
21.1 50HZ.....................................0.75KW
21.2 60HZ......................................1.1KW
22.冷却电动机功率..............................0.09KW
23.机床外形尺寸(长*宽*高).................2363*1260*1300
24.机床重量....................................1850KG
25.机床精度
25.1内孔圆度..................................0.003MM
25.2内孔圆柱度................................0.004MM
25.3内孔表面粗糙度(Ra).............................0.63
